Quasi-broadband Nodal Seismograph Built-in 3C 2Hz 260V/m/s Sensors 15s–500Hz |120 Days |4G Real-Time
Introduction
The Broadband UGL3C‑III is a 3‑component quasi‑broadband nodal seismograph for deep lithospheric imaging and long‑term passive monitoring. With a 2 Hz sensor and flat passband from 15 seconds to 500 Hz, it captures both local microseismicity and teleseismic phases. It supports 120 days of autonomous recording or 30 days of real‑time 4G/Wi‑Fi streaming, backed by our proven transmission platform. Designed for ambient noise tomography, deep crustal anisotropy, hydraulic fracturing, and CCS monitoring — the UGL3C‑III delivers the low‑frequency response, endurance, and real‑time connectivity that demanding projects require.
Mobile real-time monitoring stations for national seismological networks Real-time monitoring and imaging of oil- & gas-hydraulic fracturing
Long-term, real-time microseismic event surveillance
Real-time geological-hazard monitoring and early-warning
Microseismic real-time research by universities and institutes Ambient-noise real-time imaging for scientific studies
……
Natural Frequency:2Hz
Sensitivity:260 V/m/s
Bandwidth:15s~500Hz
Size:S220×132 mm (without spike)
Weight:<5.5 kg (without spike)
Waterproof:IP67
Operation Temperature:-20~60℃
Channels: 3-Channels
Timing accuracy: ±10 µs (GPS disciplined)
AD Converter: 32Bit ADC
Preamplifier Gain: 0 ,6, 12, 18 ,24 ,30 ,36dB
Sampling Interval: 10 ,5 ,4 ,2, 1 ,0.5 ,0.25ms
System Dynamic Range: 145 dB
Noise Level:0.11μV RMS(1ms Sampling Interval ,36dB Preamplifier Gain)
Common-mode Rejection:< -110dB(1ms Sampling Interval ,0dB Preamplifier Gain)
Harmonic Distortion:< -122dB(1ms Sampling Interval ,0dB Preamplifier Gain)
Charging Time: <15h
Operating Life@25℃:
Number of Channels:8 Channels
(Charging and data download at same time)
Weight:5.2 kg
Size:320mm×250mm×150mm
Data Transmission Interface:USB
Charging Current:Single Channel Max 4A, 8 Channels Max 32A
Input Power:220VAC, Max Current 4A, Max Power 500W
Input Power:Max 6A, Voltage 12.6V
Contact:Two-core Interface
Permanent Power Supply Solution:50W Solar Panel (with 12V controller) + Lithium Battery Pack 12.6V / 30Ah